All projects
Project Reference 300t Audacia
Electrical overhaul 300ton offshore crane for Allseas' Audacia
Project Reference Grabber Crane
Delivery and overhaul of Drakenburgh grab crane for Voorbij Prefab Amsterdam
HVC snail crane
Here we have been processing residual waste from our municipalities since 1995
Upgrading eleven cranes of the Pioneering Spirit
During this period there were always at least two software engineers from EPMC Europe Crane Solutions on board
Replacement of load moment monitoring system on the Pioneering Spirit
Allseas Engineering, owner of the Pioneering Spirit – the world’s largest heavy lift construction vessel
Mechanical overhaul of portal crane on De Zeeland II belonging to company Van Oord
EPMC Europe Crane Solutions started the mechanical overhaul of the trolleys and slewing mechanism of the crane on board the Zeeland II
Changing of sheaves on the Thialf belonging to HMC
At the start of September 2014, EPMC Europe Crane Solutions was commissioned to change the sheaves
Conversion of NDC grab crane at MEBIN
EPMC Europe Crane Solutions carried out the electric conversion of this 6.3 tonne NDC grab crane belonging to concrete specialist MEBIN
Moving and adapting grapple-top-rotating crane for Albeton
In 2014 EPMC Europe Crane Solutions was commissioned by Albeton to move and adapt an 8-tonne Drakenburgh grapple-top-rotating crane
Conversion and upgrade of 12-tonne floating grab crane at Nieuwe Waterweg Silo
Na een storing aan de hijs- en sluitmotor van de twaalf tons drijvende grijperkraan van de Nieuwe Waterweg Silo
Electrical conversion of five dock cranes belonging to Keppel Verolme
EPMC Europe Crane Solutions signed a contract with the renowned company Keppel Verolme to convert five dock cranes
Replacement of overload protection system dock crane 28 Keppel Verolme
In 2014 EPMC Europe Crane Solutions replaced an outdated overload protection system for an automatically controlled Airpes overload protection
Design, delivery, assembly and commissioning of a pickling crane
You need a crane for the automated pickling of stainless steel components
Design and delivery of an automatic pickling crane for powder coating installation at Knipping
The company Knipping in Zwaagdijk makes window frames, doors and dormer windows
New overhead crane for waste processing company HVC
The overhead crane belonging to waste processing company HVC had to be replaced in 2014
3.2 tonne single girder grab overhead crane for AxpoKompogas
he end user, Attero, put the crane into service at the end of 2013
Portal overhaul Vattenfall
Conversion and overhaul portal crane water intake station Vattenfall
Deliver overhauled container crane for Westerman Logistics
This container crane from Zurich has been completely overhauled and fitted with new drives and controls.
Conversion Outdoor Taps Voton
Adjusting crane rides outdoor taps Voton B.V.
New delivery 6 GH cranes welding hall
For Voorbij Funderingstechniek, we were commissioned to supply and install four 16-ton double girder overhead cranes and two wall console cranes for the new welding hall.
Three new under-hang cranes for Gooiland Elektro B.V.
A nice order to supply and assemble three 500 kg underhang cranes for the workshop.
